Swan Neck Frame
The MCT Brattberg Swan Neck frame is designed for rooftop installations. It features either one or two openings. It is to be used with corresponding MCT Brattberg components to form a complete sealing solution.
Attachment is done by bolting.
Correct and safe installations
To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.
Similar products
LSJ
Longitudinal Sealing Cable Joint is used to run an electrical cable through a tank/pipe between two pressure-tight sections.
See specs and variations for LSJ
PHP
Longitudinal sealed pressure hull cable penetrator is used to run an electrical cable through a pressure hull.
See specs and variations for PHP
SR cable and pipe seals
The seal can be supplied cut to allow pre terminated cable to be installed. It is supplied with a center core providing a seal prior to cable installation.
See specs and variations for SR cable and pipe seals
MSR glands
The MSR glands are designed to seal up to 8 cables between 4 and 32 mm (0.16” and 1.26”) diameter.
See specs and variations for MSR glands